Removed USB stack

prj_debug.conf

@@ -1,79 +1,62 @@
-# Configure serial
+# Disable Defaults + USB
-CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_CONSOLE=n
-CONFIG_SERIAL=y
-
-# Make sure printk is not printing to the UART console
-CONFIG_CONSOLE=y
 CONFIG_UART_CONSOLE=n
+CONFIG_SERIAL=n
+CONFIG_SHELL=n
+CONFIG_USB_DEVICE_STACK=n
+CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=n
+CONFIG_DK_LIBRARY=n
 
+# Disable Networking Features
+CONFIG_NET_IPV6=n
+CONFIG_NET_IP_ADDR_CHECK=n
+
+# Priorities / Memories
 CONFIG_MAIN_THREAD_PRIORITY=7
+CONFIG_HEAP_MEM_POOL_SIZE=4096
+
+CONFIG_IEEE802154_NRF5_RX_STACK_SIZE=2048
+CONFIG_ZBOSS_DEFAULT_THREAD_STACK_SIZE=10240
+CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=4096
 
+CONFIG_NET_PKT_RX_COUNT=256
+CONFIG_NET_PKT_TX_COUNT=10
+
+# Zigbee
 CONFIG_ZIGBEE=y
 CONFIG_ZIGBEE_APP_UTILS=y
 CONFIG_ZIGBEE_ROLE_ROUTER=y
-
+CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_MULTI=y
-CONFIG_NET_IPV6=n
-CONFIG_NET_IP_ADDR_CHECK=n
 
 # Crypto config
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_NRF_ECB=y
 CONFIG_CRYPTO_INIT_PRIORITY=80
 
-# USB subsystem configuration
+# Logging
-CONFIG_USB_DEVICE_STACK=y
+CONFIG_USE_SEGGER_RTT=y
-CONFIG_USB_DEVICE_PRODUCT="jamie Shell"
+CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=10240
-CONFIG_USB_CDC_ACM=y
+CONFIG_LOG=y
-
+CONFIG_LOG_BACKEND_RTT=y
-# Increase RX serial ring buffer
+CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS=0
-CONFIG_SHELL_BACKEND_SERIAL_RX_RING_BUFFER_SIZE=128
+CONFIG_LOG_MODE_IMMEDIATE=y
 
-# Let apps control the serial line
+CONFIG_FATAL_ERROR_LOG_LEVEL_DBG=y
-CONFIG_UART_LINE_CTRL=y
+CONFIG_MPSL_LOG_LEVEL_DBG=y
+CONFIG_ZBOSS_TRACE_LOG_LEVEL_DBG=y
+CONFIG_ZBOSS_TRACE_MASK=0x00000C48
 
-CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=y
 
-CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_MULTI=y
+# Fatal Error Config
-
+CONFIG_RESET_ON_FATAL_ERROR=y
-CONFIG_SHELL=y
+CONFIG_ZBOSS_RESET_ON_ASSERT=y
-CONFIG_ZIGBEE_SHELL=y
-CONFIG_ZIGBEE_SHELL_DEBUG_CMD=y
-CONFIG_SENSOR_SHELL=n
 
-CONFIG_HEAP_MEM_POOL_SIZE=4096
+# Bootlader
 CONFIG_BOARD_HAS_NRF5_BOOTLOADER=n
 
+# Debug Optimizations
 CONFIG_DEBUG=y
 CONFIG_DEBUG_THREAD_INFO=y
 CONFIG_DEBUG_OPTIMIZATIONS=y
-
 CONFIG_DEBUG_INFO=y
 CONFIG_MPSL_ASSERT_HANDLER=n
-
-CONFIG_NET_PKT_RX_COUNT=256
-CONFIG_NET_PKT_TX_COUNT=10
-CONFIG_ZIGBEE_SHELL_ENDPOINT=64
-CONFIG_DK_LIBRARY=n
-
-CONFIG_LOG=y
-CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS=0
-
-CONFIG_MPSL_LOG_LEVEL_DBG=y
-CONFIG_ZBOSS_TRACE_LOG_LEVEL_DBG=y
-
-CONFIG_USE_SEGGER_RTT=y
-CONFIG_LOG_BACKEND_RTT=y
-CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=10240
-
-CONFIG_LOG_MODE_IMMEDIATE=y
-
-CONFIG_SHELL_LOG_BACKEND=n
-CONFIG_USB_NRFX_WORK_QUEUE_STACK_SIZE=2048
-CONFIG_IEEE802154_NRF5_RX_STACK_SIZE=2048
-CONFIG_ZBOSS_DEFAULT_THREAD_STACK_SIZE=10240
-CONFIG_USB_WORKQUEUE_STACK_SIZE=4096
-
-CONFIG_RESET_ON_FATAL_ERROR=y
-CONFIG_FATAL_ERROR_LOG_LEVEL_DBG=y
-CONFIG_ZBOSS_TRACE_MASK=0x00000C48
-CONFIG_ZBOSS_RESET_ON_ASSERT=n

prj_release.conf

@@ -1,64 +1,64 @@
-# LOG configuration
+# Disable USB
-CONFIG_LOG=y
+CONFIG_CONSOLE=n
-CONFIG_LOG_MODE_DEFERRED=y
+CONFIG_UART_CONSOLE=n
-CONFIG_LOG_BUFFER_SIZE=4096
+CONFIG_SERIAL=n
-CONFIG_LOG_PROCESS_THREAD_STACK_SIZE=1024
+
-CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS=1000
+# Disable Defaults + USB
+CONFIG_CONSOLE=n
+CONFIG_UART_CONSOLE=n
+CONFIG_SERIAL=n
+CONFIG_SHELL=n
+CONFIG_USB_DEVICE_STACK=n
+CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=n
+CONFIG_DK_LIBRARY=n
+
+# Disable Networking Features
+CONFIG_NET_IPV6=n
+CONFIG_NET_IP_ADDR_CHECK=n
 
-# Configure serial
+# Priorities / Memories
-CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_MAIN_THREAD_PRIORITY=7
-CONFIG_SERIAL=y
+CONFIG_HEAP_MEM_POOL_SIZE=4096
 
-# Make sure printk is not printing to the UART console
+CONFIG_IEEE802154_NRF5_RX_STACK_SIZE=2048
-CONFIG_CONSOLE=y
+CONFIG_ZBOSS_DEFAULT_THREAD_STACK_SIZE=10240
-CONFIG_UART_CONSOLE=y
+CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=4096
 
-CONFIG_HEAP_MEM_POOL_SIZE=2048
+CONFIG_NET_PKT_RX_COUNT=256
-CONFIG_MAIN_THREAD_PRIORITY=7
+CONFIG_NET_PKT_TX_COUNT=10
 
+# Zigbee
 CONFIG_ZIGBEE=y
 CONFIG_ZIGBEE_APP_UTILS=y
 CONFIG_ZIGBEE_ROLE_ROUTER=y
-
+CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_MULTI=y
-CONFIG_NET_IPV6=n
+CONFIG_ZIGBEE_FOTA=y
-CONFIG_NET_IP_ADDR_CHECK=n
 
 # Crypto config
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_NRF_ECB=y
 CONFIG_CRYPTO_INIT_PRIORITY=80
 
-# USB subsystem configuration
+# Logging
-CONFIG_USB_DEVICE_STACK=y
+CONFIG_USE_SEGGER_RTT=y
-CONFIG_USB_DEVICE_PRODUCT="jamie Shell"
+CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=10240
-CONFIG_USB_CDC_ACM=y
+CONFIG_LOG=y
-
+CONFIG_LOG_BACKEND_RTT=y
-# Let apps control the serial line
+CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS=0
-CONFIG_UART_LINE_CTRL=y
+CONFIG_LOG_MODE_IMMEDIATE=y
 
-CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=y
+CONFIG_FATAL_ERROR_LOG_LEVEL_DBG=y
+CONFIG_MPSL_LOG_LEVEL_DBG=y
 
+# Fatal Error Config
 CONFIG_RESET_ON_FATAL_ERROR=y
 CONFIG_ZBOSS_RESET_ON_ASSERT=y
 
-CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_MULTI=y
+# Bootloader
-
-CONFIG_SENSOR_SHELL=n
-
-CONFIG_SHELL=y
-CONFIG_ZIGBEE_SHELL=y
-
 CONFIG_BOARD_HAS_NRF5_BOOTLOADER=y
-
 CONFIG_BOOTLOADER_MCUBOOT=y
-CONFIG_ZIGBEE_FOTA=y
 CONFIG_IMG_MANAGER=y
 CONFIG_STREAM_FLASH=y
 CONFIG_STREAM_FLASH_ERASE=y
 CONFIG_MCUBOOT_GENERATE_UNSIGNED_IMAGE=y
-CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION="0.0.0"
+CONFIG_MCUBOOT_IMGTOOL_SIGN_VERSION="0.0.0"
-
-CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=4096
-CONFIG_USB_NRFX_WORK_QUEUE_STACK_SIZE=2048
-CONFIG_IEEE802154_NRF5_RX_STACK_SIZE=2048
-CONFIG_ZBOSS_DEFAULT_THREAD_STACK_SIZE=10240