Used zigbee shell sample prj.conf to get working zigbee app

boards/nrf52840dongle_nrf52840.overlay

@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2021 Nordic Semiconductor ASA
+ *
+ * SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+ */
+
+ / {
+	chosen {
+		zephyr,entropy = &rng;
+		ncs,zigbee-timer = &timer2;
+	};
+};
+
+&timer2 {
+	status = "okay";
+};

prj.conf

@@ -1,10 +1,54 @@
 
-CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=y
-CONFIG_SHELL=y
-CONFIG_CRYPTO=y
+# Copyright (c) 2022 Nordic Semiconductor ASA
+#
+# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
+#
+
+# Configure serial
+CONFIG_UART_INTERRUPT_DRIVEN=y
+CONFIG_SERIAL=y
+
+# Make sure printk is not printing to the UART console
 CONFIG_CONSOLE=y
-CONFIG_LOG=y
-CONFIG_LOG_BACKEND_UART=y
+CONFIG_UART_CONSOLE=y
+
+CONFIG_HEAP_MEM_POOL_SIZE=2048
+CONFIG_MAIN_THREAD_PRIORITY=7
 
 CONFIG_ZIGBEE=y
-CONFIG_ZIGBEE_ROLE_ROUTER=y
+CONFIG_ZIGBEE_APP_UTILS=y
+CONFIG_ZIGBEE_ROLE_ROUTER=y
+
+# This example requires more workqueue stack
+CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048
+
+# Enable nRF ECB driver
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_NRF_ECB=y
+CONFIG_CRYPTO_INIT_PRIORITY=80
+
+# Networking
+CONFIG_NET_IPV6=n
+CONFIG_NET_IP_ADDR_CHECK=n
+
+# Zigbee shell
+CONFIG_ZIGBEE_SHELL=y
+CONFIG_ZIGBEE_SHELL_DEBUG_CMD=y
+CONFIG_ZIGBEE_SHELL_ENDPOINT=64
+
+# Increase RX serial ring buffer
+CONFIG_SHELL_BACKEND_SERIAL_RX_RING_BUFFER_SIZE=128
+
+# USB subsystem configuration
+CONFIG_USB_DEVICE_STACK=y
+CONFIG_USB_DEVICE_PRODUCT="Zigbee Shell"
+CONFIG_USB_CDC_ACM=y
+CONFIG_UART_LINE_CTRL=y
+
+# Initialize USB device as soon as possible as the USB CDC ACM is used
+# as backend for both Shell and Logging subsystems.
+CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=y
+
+# Enable this to duplicate Zephyr logs to default Logger serial backend,
+# usually connected to on-board JLink device.
+# CONFIG_LOG_BACKEND_UART=y

src/main.c

@@ -5,6 +5,11 @@
 
 LOG_MODULE_REGISTER(app, LOG_LEVEL_INF);
 
+#include <zboss_api.h>
+void zboss_signal_handler(zb_uint8_t param) {
+
+}
+
 int main(void)
 {
         LOG_INF("Starting main");