<p>Calls <ttclass="docutils literal"><spanclass="pre">fn(obj,args...)</span></tt>, then finalizes with <ttclass="docutils literal">obj:delete()</tt>.</p>
:tweak clear-missing:Remove the missing status from the selected unit. This allows engraving slabs for ghostly, but not yet found, creatures.
:tweak clear-missing:Remove the missing status from the selected unit. This allows engraving slabs for ghostly, but not yet found, creatures.
:tweak clear-ghostly:Remove the ghostly status from the selected unit and mark it as dead. This allows getting rid of bugged ghosts which do not show up in the engraving slab menu at all, even after using clear-missing. It works, but is potentially very dangerous - so use with care. Probably (almost certainly) it does not have the same effects like a proper burial. You've been warned.
:tweak clear-ghostly:Remove the ghostly status from the selected unit and mark it as dead. This allows getting rid of bugged ghosts which do not show up in the engraving slab menu at all, even after using clear-missing. It works, but is potentially very dangerous - so use with care. Probably (almost certainly) it does not have the same effects like a proper burial. You've been warned.
:tweak fixmigrant:Remove the resident/merchant flag from the selected unit. Intended to fix bugged migrants/traders who stay at the map edge and don't enter your fort. Only works for dwarves (or generally the player's race in modded games). Do NOT abuse this for 'real' caravan merchants (if you really want to kidnap them, use 'tweak makeown' instead, otherwise they will have their clothes set to forbidden etc).
:tweak makeown:Force selected unit to become a member of your fort. Can be abused to grab caravan merchants and escorts, even if they don't belong to the player's race. Foreign sentients (humans, elves) can be put to work, but you can't assign rooms to them and they don't show up in DwarfTherapist because the game treats them like pets. Grabbing draft animals from a caravan can result in weirdness (animals go insane or berserk and are not flagged as tame), but you are allowed to mark them for slaughter. Grabbing wagons results in some funny spam, then they are scuttled.
tubefill
tubefill
========
========
@ -801,41 +803,45 @@ Export dwarves to RuneSmith-compatible XML.
zone
zone
====
====
Helps a bit with managing activity zones (pens, pastures and pits).
Helps a bit with managing activity zones (pens, pastures and pits) and cages.
Options:
Options:
--------
--------
:set:Set zone under cursor as default for future assigns.
:set:Set zone or cage under cursor as default for future assigns.
:assign:Assign unit(s) to the pen or pit marked with the 'set' command. If no filters are set a unit must be selected in the in-game ui. Can also be followed by a valid zone id which will be set instead.
:assign:Assign unit(s) to the pen or pit marked with the 'set' command. If no filters are set a unit must be selected in the in-game ui. Can also be followed by a valid zone id which will be set instead.
:unassign:Unassign selected creature from it's zone.
:unassign:Unassign selected creature from it's zone.
:autonestbox:Assign all (unless count is specified) unpastured female egg-layers to empty pens which contain a nestbox. If the pen is bigger than 1x1 the nestbox must be placed at the top left corner to be recognized. Only 1 unit will be assigned per pen.
:nick:Mass-assign nicknames, must be followed by the name you want to set.
:remnick:Mass-remove nicknames.
:tocages:Assign unit(s) to cages inside a pasture.
:uinfo:Print info about unit(s). If no filters are set a unit must be selected in the in-game ui.
:uinfo:Print info about unit(s). If no filters are set a unit must be selected in the in-game ui.
:zinfo:Print info about zone(s). If no filters are set zones under the cursor are listed.
:zinfo:Print info about zone(s). If no filters are set zones under the cursor are listed.
:verbose:Print some more info.
:verbose:Print some more info.
:filters:Print list of valid filter options.
:filters:Print list of valid filter options.
:examples:Print some usage examples.
:examples:Print some usage examples.
:not:Negates the next filter keyword.
Filters:
Filters:
--------
--------
:all:Process all units (to be used with additional filters).
:all:Process all units (to be used with additional filters).
:count:Must be followed by a number. Process only n units (to be used with additional filters).
:count:Must be followed by a number. Process only n units (to be used with additional filters).
:race:Must be followed by a race raw id (e.g. BIRD_TURKEY, ALPACA etc).
:unassigned:Not assigned to zone, chain or built cage.
:unassigned:Not assigned to zone, chain or built cage.
:caged:In a built cage.
:uncaged:Not in a cage (in case you want your stockpiles to be left alone).
:foreign:Not of own civilization (i.e. own fortress).
:own:From own civilization (i.e. own fortress).
:war:Trained war creature.
:tamed:Creature is tame.
:trained:Creature is trained.
:untrained:Creature is untrained.
:male:Creature is male.
:female:Creature is female.
:egglayer:Race lays eggs.
:grazer:Race is a grazer.
:milkable:Race is milkable.
:minage:Minimum age. Must be followed by number.
:minage:Minimum age. Must be followed by number.
:maxage:Maximum age. Must be followed by number.
:maxage:Maximum age. Must be followed by number.
:race:Must be followed by a race raw id (e.g. BIRD_TURKEY, ALPACA etc). Negatable.
:caged:In a built cage. Negatable.
:own:From own civilization. Negatable.
:merchant:Is a merchant / belongs to a merchant. Should only be used for pitting, not for stealing animals (slaughter should work).
:war:Trained war creature. Negatable.
:hunting:Trained hunting creature. Negatable.
:tamed:Creature is tame. Negatable.
:trained:Creature is trained. Finds war/hunting creatures as well as creatures who have a training level greater than 'domesticated'. If you want to specifically search for war/hunting creatures use 'war' or 'hunting' Negatable.
:trainablewar:Creature can be trained for war (and is not already trained for war/hunt). Negatable.
:trainablehunt:Creature can be trained for hunting (and is not already trained for war/hunt). Negatable.
:male:Creature is male. Negatable.
:female:Creature is female. Negatable.
:egglayer:Race lays eggs. Negatable.
:grazer:Race is a grazer. Negatable.
:milkable:Race is milkable. Negatable.
Usage with single units
Usage with single units
-----------------------
-----------------------
@ -843,13 +849,97 @@ One convenient way to use the zone tool is to bind the command 'zone assign' to
Usage with filters
Usage with filters
------------------
------------------
All filters can be used together with the 'assign' command. The only restriction is that it's not possible to assign units who are inside built cages or chained because in most cases that won't be desirable anyways. Usually you should always use the filter 'own' (which implies tame) unless you want to use the zone tool for pitting hostiles. 'own' ignores own dwarves unless you specify 'race DWARF' (so it's safe to use 'assign all own' to one big pasture if you want to have all your animals at the same place). 'egglayer' and 'milkable' should be used together with 'female' unless you have a mod with egg-laying male elves who give milk or whatever.
All filters can be used together with the 'assign' command. Restrictions: It's not possible to assign units who are inside built cages or chained because in most cases that won't be desirable anyways. It's not possible to cage owned pets because in that case the owner uncages them after a while which results in infinite hauling back and forth. Usually you should always use the filter 'own' (which implies tame) unless you want to use the zone tool for pitting hostiles. 'own' ignores own dwarves unless you specify 'race DWARF' (so it's safe to use 'assign all own' to one big pasture if you want to have all your animals at the same place). 'egglayer' and 'milkable' should be used together with 'female' unless you have a mod with egg-laying male elves who give milk or whatever. Merchants and their animals are ignored unless you specify 'merchant' (pitting them should be no problem, but stealing and pasturing their animals is not a good idea since currently they are not properly added to your own stocks; slaughtering them should work). Most filters can be negated (e.g. 'not grazer' -> race is not a grazer).
Mass-renaming
-------------
Using the 'nick' command you can set the same nickname for multiple units. If used without 'assign', 'all' or 'count' it will rename all units in the current default target zone. Combined with 'assign', 'all' or 'count' (and further optional filters) it will rename units matching the filter conditions.
Cage zones
----------
Using the 'tocages' command you can assign units to a set of cages, for example a room next to your butcher shop(s). They will be spread evenly among available cages to optimize hauling to and butchering from them. For this to work you need to build cages and then place one pen/pasture activity zone above them, covering all cages you want to use. Then use 'zone set' (like with 'assign') and use 'zone tocages filter1 filter2 ...'. 'tocages' overwrites 'assign' because it would make no sense, but can be used together with 'nick' or 'remnick' and all the usual filters.
Examples
--------
``zone assign all own ALPACA minage 3 maxage 10``
``zone assign all own ALPACA minage 3 maxage 10``
Assign all own alpacas who are between 3 and 10 years old to the selected pasture.
Assign all own alpacas who are between 3 and 10 years old to the selected pasture.
``zone assign all own caged grazer``
``zone assign all own caged grazer nick ineedgrass``
Assign all own grazers who are sitting in cages on stockpiles (e.g. after buying them from merchants) to the selected pasture.
Assign all own grazers who are sitting in cages on stockpiles (e.g. after buying them from merchants) to the selected pasture and give them the nickname 'ineedgrass'.
``zone assign all own not grazer not race CAT``
Assign all own animals who are not grazers, excluding cats.
``zone assign count 5 own female milkable``
``zone assign count 5 own female milkable``
Assign up to 5 own female milkable creatures to the selected pasture.
Assign up to 5 own female milkable creatures to the selected pasture.
``zone assign all own race DWARF maxage 2``
``zone assign all own race DWARF maxage 2``
Throw all useless kids into a pit :)
Throw all useless kids into a pit :)
``zone nick donttouchme``
Nicknames all units in the current default zone or cage to 'donttouchme'. Mostly intended to be used for special pastures or cages which are not marked as rooms you want to protect from autobutcher.
``zone tocages count 50 own tame male not grazer``
Stuff up to 50 owned tame male animals who are not grazers into cages built on the current default zone.
autonestbox
===========
Assigns unpastured female egg-layers to nestbox zones. Requires that you create pen/pasture zones above nestboxes. If the pen is bigger than 1x1 the nestbox must be in the top left corner. Only 1 unit will be assigned per pen, regardless of the size. The age of the units is currently not checked, most birds grow up quite fast. Egglayers who are also grazers will be ignored, since confining them to a 1x1 pasture is not a good idea. Only tame and domesticated own units are processed since pasturing half-trained wild egglayers could destroy your neat nestbox zones when they revert to wild. When called without options autonestbox will instantly run once.
Options:
--------
:start:Start running every X frames (df simulation ticks). Default: X=6000, which would be every 60 seconds at 100fps.
:stop:Stop running automatically.
:sleep:Must be followed by number X. Changes the timer to sleep X frames between runs.
autobutcher
===========
Assigns lifestock for slaughter once it reaches a specific count. Requires that you add the target race(s) to a watch list. Only tame units will be processed. Named units will be completely ignored (to protect specific animals fro autobutcher you can give them nicknames with the tool 'rename unit' for single units or with 'zone nick' to mass-rename units in pastures and cages). Creatures trained for war or hunting will be ignored as well. Creatures assigned to cages will be ignored if the cage is defined as a room (to avoid butchering unnamed zoo animals). Once you have too much adults, the oldest will be butchered first. Once you have too much kids, the youngest will be butchered first. If you don't set any target count the following default will be used: 1 male kid, 5 female kids, 1 male adult, 5 female adults.
Options:
--------
:start:Start running every X frames (df simulation ticks). Default: X=6000, which would be every 60 seconds at 100fps.
:stop:Stop running automatically.
:sleep:Must be followed by number X. Changes the timer to sleep X frames between runs.
:watch R:Start watching a race. R can be a valid race RAW id (ALPACA, BIRD_TURKEY, etc) or a list of ids seperated by spaces or the keyword 'all' which affects all races on your current watchlist.
:unwatch R:Stop watching race(s). The current target settings will be remembered. R can be a list of ids or the keyword 'all'.
:forget R:Stop watching race(s) and forget it's/their target settings. R can be a list of ids or the keyword 'all'.
:autowatch:Automatically adds all new races (animals you buy from merchants, tame yourself or get from migrants)
to the watch list using default target count.
:noautowatch:Stop auto-adding new races to the watchlist.
:list:Print the current status and watchlist.
:list_export:Print status and watchlist in a format which can be used to import them to another savegame (see notes).
:target fk mk fa ma R:Set target count for specified race(s).
fk = number of female kids,
mk = number of male kids,
fa = number of female adults,
ma = number of female adults.
R can be a list of ids or the keyword 'all' or 'new'. R = 'all': change target count for all races on watchlist and set the new default for the future. R = 'new': don't touch current settings on the watchlist, only set the new default for future entries.
:example:Print some usage examples.
Examples:
---------
You want to keep max 7 kids (4 female, 3 male) and max 3 adults (2 female, 1 male) of the race alpaca. Once the kids grow up the oldest adults will get slaughtered. Excess kids will get slaughtered starting with the youngest to allow that the older ones grow into adults. Any unnamed cats will be slaughtered as soon as possible.
::
autobutcher target 4 3 2 1 ALPACA BIRD_TURKEY
autobutcher target 0 0 0 0 CAT
autobutcher watch ALPACA BIRD_TURKEY CAT
autobutcher start
Automatically put all new races onto the watchlist and mark unnamed tame units for slaughter as soon as they arrive in your fort. Settings already made for specific races will be left untouched.
::
autobutcher target 0 0 0 0 new
autobutcher autowatch
autobutcher start
Stop watching the races alpaca and cat, but remember the target count settings so that you can use 'unwatch' without the need to enter the values again. Note: 'autobutcher unwatch all' works, but only makes sense if you want to keep the plugin running with the 'autowatch' feature or manually add some new races with 'watch'. If you simply want to stop it completely use 'autobutcher stop' instead.
::
autobutcher unwatch ALPACA CAT
Note:
-----
Settings and watchlist are stored in the savegame, so that you can have different settings for each world. If you want to copy your watchlist to another savegame you can use the command list_export:
::
Load savegame where you made the settings.
Start a CMD shell and navigate to the df directory. Type the following into the shell:
commands.push_back(PluginCommand("tiletypes","Paint map tiles freely, similar to liquids.",df_tiletypes,true));
commands.push_back(PluginCommand("tiletypes-command","Run the given commands (seperated by ' ; '; an empty command is the same as run).",df_tiletypes_command));
commands.push_back(PluginCommand("tiletypes-here","Use the last settings from tiletypes, including brush, at cursor location.",df_tiletypes_here));
commands.push_back(PluginCommand("tiletypes-here-point","Use the last settings from tiletypes, not including brush, at cursor location.",df_tiletypes_here_point));
out.print("This tool allows painting tiles types with a brush, using an optional filter.\n"
"The tool is interactive, similarly to the liquids tool.\n"
"Further help is available inside.\n"
);
returnCR_OK;
}
}
if(!out.is_console())
returnCR_FAILURE;
Console&con=static_cast<Console&>(out);
TileTypefilter,paint;
Brush*brush=newRectangleBrush(1,1);
boolend=false;
std::stringbrushname="point";
intwidth=1,height=1,z_levels=1;
con<<"Welcome to the tiletype tool.\nType 'help' or '?' for a list of available commands, 'q' to quit.\nPress return after a command to confirm."<<std::endl;
con.printerr("THIS TOOL CAN BE DANGEROUS. YOU'VE BEEN WARNED.\n");
out_.print("This tool allows painting tiles types with a brush, using an optional filter.\n"
"The tool is interactive, similarly to the liquids tool.\n"
"Further help is available inside.\n"
);
returnCR_OK;
}
}
if(!out_.is_console())
returnCR_FAILURE;
Console&out=static_cast<Console&>(out_);
std::vector<std::string>commands;
boolend=false;
out<<"Welcome to the tiletype tool.\nType 'help' or '?' for a list of available commands, 'q' to quit.\nPress return after a command to confirm."<<std::endl;
out.printerr("THIS TOOL CAN BE DANGEROUS. YOU'VE BEEN WARNED.\n");
jj