# Configure serial
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_SERIAL=y

# Make sure printk is not printing to the UART console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=n

CONFIG_MAIN_THREAD_PRIORITY=7

CONFIG_ZIGBEE=y
CONFIG_ZIGBEE_APP_UTILS=y
CONFIG_ZIGBEE_ROLE_ROUTER=y

CONFIG_NET_IPV6=n
CONFIG_NET_IP_ADDR_CHECK=n

# Crypto config
CONFIG_CRYPTO=y
CONFIG_CRYPTO_NRF_ECB=y
CONFIG_CRYPTO_INIT_PRIORITY=80

# USB subsystem configuration
CONFIG_USB_DEVICE_STACK=y
CONFIG_USB_DEVICE_PRODUCT="jamie Shell"
CONFIG_USB_CDC_ACM=y

# Increase RX serial ring buffer
CONFIG_SHELL_BACKEND_SERIAL_RX_RING_BUFFER_SIZE=128

# Let apps control the serial line
CONFIG_UART_LINE_CTRL=y

CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=y

CONFIG_ZIGBEE_CHANNEL_SELECTION_MODE_MULTI=y

CONFIG_SHELL=y
CONFIG_ZIGBEE_SHELL=y
CONFIG_ZIGBEE_SHELL_DEBUG_CMD=y
CONFIG_SENSOR_SHELL=n

CONFIG_HEAP_MEM_POOL_SIZE=4096
CONFIG_BOARD_HAS_NRF5_BOOTLOADER=n

CONFIG_DEBUG=y
CONFIG_DEBUG_THREAD_INFO=y
CONFIG_DEBUG_OPTIMIZATIONS=y

CONFIG_DEBUG_INFO=y
CONFIG_MPSL_ASSERT_HANDLER=n

CONFIG_NET_PKT_RX_COUNT=256
CONFIG_NET_PKT_TX_COUNT=10
CONFIG_ZIGBEE_SHELL_ENDPOINT=64
CONFIG_DK_LIBRARY=n

CONFIG_LOG=y
CONFIG_LOG_PROCESS_THREAD_STARTUP_DELAY_MS=0

CONFIG_MPSL_LOG_LEVEL_DBG=y
CONFIG_ZBOSS_TRACE_LOG_LEVEL_DBG=y

CONFIG_USE_SEGGER_RTT=y
CONFIG_LOG_BACKEND_RTT=y
CONFIG_SEGGER_RTT_BUFFER_SIZE_UP=10240

CONFIG_LOG_MODE_IMMEDIATE=y

CONFIG_SHELL_LOG_BACKEND=n
CONFIG_USB_NRFX_WORK_QUEUE_STACK_SIZE=2048
CONFIG_IEEE802154_NRF5_RX_STACK_SIZE=2048
CONFIG_ZBOSS_DEFAULT_THREAD_STACK_SIZE=10240
CONFIG_USB_WORKQUEUE_STACK_SIZE=4096

CONFIG_RESET_ON_FATAL_ERROR=y
CONFIG_FATAL_ERROR_LOG_LEVEL_DBG=y
CONFIG_ZBOSS_TRACE_MASK=0x00000C48
CONFIG_ZBOSS_RESET_ON_ASSERT=n