# Copyright (c) 2022 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#

# Configure serial
CONFIG_UART_INTERRUPT_DRIVEN=y
CONFIG_SERIAL=y

# Make sure printk is not printing to the UART console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

CONFIG_HEAP_MEM_POOL_SIZE=2048
CONFIG_MAIN_THREAD_PRIORITY=7

CONFIG_ZIGBEE=y
CONFIG_ZIGBEE_APP_UTILS=y
CONFIG_ZIGBEE_ROLE_ROUTER=y

# This example requires more workqueue stack
CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048

# Enable nRF ECB driver
CONFIG_CRYPTO=y
CONFIG_CRYPTO_NRF_ECB=y
CONFIG_CRYPTO_INIT_PRIORITY=80

# Networking
CONFIG_NET_IPV6=n
CONFIG_NET_IP_ADDR_CHECK=n

# Zigbee shell
CONFIG_ZIGBEE_SHELL=y
CONFIG_ZIGBEE_SHELL_DEBUG_CMD=y
CONFIG_ZIGBEE_SHELL_ENDPOINT=64

# Increase RX serial ring buffer
CONFIG_SHELL_BACKEND_SERIAL_RX_RING_BUFFER_SIZE=128

# USB subsystem configuration
CONFIG_USB_DEVICE_STACK=y
CONFIG_USB_DEVICE_PRODUCT="Zigbee Shell"
CONFIG_USB_CDC_ACM=y
CONFIG_UART_LINE_CTRL=y

# Initialize USB device as soon as possible as the USB CDC ACM is used
# as backend for both Shell and Logging subsystems.
CONFIG_USB_DEVICE_INITIALIZE_AT_BOOT=y

# Enable this to duplicate Zephyr logs to default Logger serial backend,
# usually connected to on-board JLink device.
# CONFIG_LOG_BACKEND_UART=y