This kind of functionality is much more important now than it used to
be since there are so many supported building types.
Also modified the 'Planning Mode' status on the building placement
screen to reflect whether we're in quickfort mode, enable all mode, or
whether just the building type is enabled.
this setting is not persisted (just like quickfort_mode is not
persisted), but it can be set from onMapLoad.init
for items that cannot have a quality or be decorated:
in place mode, don't show quality adjustment hotkeys (or isDecorated
flag hotkey) and don't interpret the associated keycodes if they are
pressed.
in query mode, don't show quality or decorated fields.
solves the confusing behavior when both automaterial and buildingplan
are enabled for constructions. the two plugins now communicate with each
other over the Lua layer to negotiate consistent behavior.
if neither plugin is enabled, the standard DF UI acts as normal
if automaterial is enabled but buildingplan is not, then automaterial
behavior is unchanged.
if buildingplan is enabled and automaterial is not then behavior is
the same as other buildings with buildingplan (no material selection
screen, screen stays on building placement screen after placement).
this commit fixes a bug, though, where buildingplan would only lay
down a single tile of contruction instead of a solid block when a
block is requested.
if both plugins are enabled but buildingplan is not enabled for the
building type then automaterial is unchanged from previous behavior,
execpt for an additional header showing the separation between
automaterial hotkeys and buildingplan hotkeys.
finally, if both plugins are enabled and buildingplan is enabled for the
building type then buildingplan behavior prevails, but the box select and
hollow designations features of automaterial are still usable and
useful. the 'Auto Mat-select', 'Reselect Type', and "Open Placement"
automaterial hotkeys are hidden in the UI and ignored in the feed. This
is because buildingplan takes over material selection, so 'Auto
Mat-select' doesn't make sense. Buildingplan also already stays on the
placement screen after placement, so 'Reselect Type' is not necessary.
And all buildingplan-placed buildings have relaxed placement
restrictions (e.g. they can be built in mid-air) so 'Open Placement' is
also not necessary. The missing options are replaced with blank lines so
the vertical alignment of all other options stays constant.
we also remove a few extra lua_pop() calls that are made superfluous by
the StackUnwinder.
- remove buildings_use_blocks setting from quickfort config file
- add a new Buildingplan Global Settings dialog to house global settings
- move Quickfort Mode (for legacy Python Quickfort) into that dialog
- add four settings to control how generic building materials are matched:
- blocks
- boulders
- logs
- bars
- ajust the buildingplan algorithm to register duplicate tasks for
building material item filters, one for each type. since we track how
many items we've matched for a filter, the first matched item will
"win" and the extras will get detected as invalid and popped off the
queue.
- ensure boulders, logs, and bars are scanned last, and in that order
- more global settings planned for the future! see
http://www.bay12forums.com/smf/index.php?topic=176889.msg8202679#msg8202679
but restrict to only the currently supported set so we can still assume only one filter is required for each building.
changes:
- update buildingplan plugin version to 2.0
- new serialization format for planned buildings
- old persistent data is automatically migrated to new format on load
- algorithm now respects job_item filters; items must match job_item filter and buildingplan ItemFilter
- more invalid items are now filtered out, like items encased in ice. are there any others we should be checking (see BadFlags struct)
- items are sorted before job is unsuspended so final item ordering is correct regardless of what order the items were matched and attached
- item counts in filters are kept up to date so if buildingplan is disabled before all filters are matched and the building is completed by DF itself, the item counts will come out correct (though the item ordering and building "roughness" may be incorrect)
- fixes two memory leaks in building finalization code
- allows artifacts to be matched (ItemFilter defaults now top out at Masterful -- Artifact is selectable but must be manually specified)
- add gui to switch between items for buildings that require multiple item types
Replace C++ building construction code with lua constructBuilding so we can get the proper job_item filters set. these filters will be used when we replace the core buildingplan algorithm in the next PR.
Lots of refactoring and reorganizing, with only cosmetic player-visible changes.
- show quickfort mode hotlkey label regardless of whether the current building type has buildingplan enabled. before, it was only shown after the user enabled buildingplan for the current building. this eliminates the extra step when enabling quickfort mode, which force-enables all building types.
- changed signature of lua-exported isPlannableBuilding to take subtype
and custom type in addition to building type. this is only used by
quickfort, and it already sends all three params in preparation for
this change
- added lua-exported scheduleCycle(), which is like doCycle(), but only
takes effect on the next non-paused frame. this lets quickfort
run only one buildingplan cycle regardless of how many #build
blueprints were run
- declared a few dfhack library methods and params const so buildingplan
could call them from const methods
- converted buildingplan internal debug logging fn to have a printf api
- reshaped buildingplan-planner API and refactored implementation in
preparation for upcoming core algorithm changes for supporing all
building types (no externally-visible functionality changes)
- changed df::building_type params to type, subtype, custom tuple keys
- introduced capability to return multiple filters per building type
(though the current buildings all only have one filter per)
- split monolith hook functions in buildingplan.cpp into one per scope.
this significantly cleans up the code and preps the hooks to handle
iterating through multiple item filters.
- got rid of send_key function and replaced with better reporting of
whether keys have been handled
Major Revision
update v2.0
=-=-=-=-=
Native functions(exported to lua):
-GenerateEngine: returns engine id (args: seed)
-DestroyEngine: destroys corresponding engine (args: rngID)
-NewSeed re-seeds engine (args: rngID, seed)
-rollInt generates random integer (args: rngID, min, max)
-rollDouble generates random double (args: rngID, min, max)
-rollNormal generates random normal[gaus.] (args: rngID, avg, stddev)
-rollBool generates random boolean (args: rngID, chance)
-MakeNumSequence returns sequence id (args: start, end)
-AddToSequence adds a number to the sequence (args: seqID, num)
-ShuffleSequence shuffles the number sequence (args: rngID, seqID)
-NextInSequence returns the next number in seq.(args: seqID)
Lua plugin functions:
-MakeNewEngine returns engine id (args: seed)
Lua plugin classes:
-crng
methods:
-init(id, df, dist) :: constructor
id - Reference ID of engine to use in RNGenerations
df (optional) - bool indicating whether to destroy the Engine when the crng object is garbage collected
dist (optional) - lua number distribution to use
-__gc() :: destructor
-changeSeed(seed) :: alters engine's seed value
-setNumDistrib(distrib) :: set's the number distribution crng object should use
distrib - number distribution object to use in RNGenerations
-next() :: returns the next number in the distribution
-shuffle() :: effectively shuffles the number distribution
-normal_distribution
methods:
-init(avg, stddev) :: constructor
-next(id) :: returns next number in the distribution
id - engine ID to pass to native function
-real_distribution
methods:
-init(min, max) :: constructor
-next(id) :: returns next number in the distribution
id - engine ID to pass to native function
-int_distribution
methods:
-init(min, max) :: constructor
-next(id) :: returns next number in the distribution
id - engine ID to pass to native function
-bool_distribution
methods:
-init(min, max) :: constructor
-next(id) :: returns next boolean in the distribution
id - engine ID to pass to native function
-num_sequence
methods:
-init(a, b) :: constructor
-add(num) :: adds num to the end of the number sequence
-shuffle() :: shuffles the sequence of numbers
-next() :: returns next number in the sequence
Adds missing function exports.
Fixes numerous problems I won't go into
Implements helper functions for random number generation.
Implemented using C++11 <random> library.
Exported Lua Functions:
- seedRNG(seed)
- rollInt(min, max)
- rollDouble(min, max)
- rollNormal(mean, std_deviation)
- rollBool(chance_for_true)
- resetIndexRolls(string, array_length) --String identifies the instance of SimpleNumDistribution to reset
- rollIndex(string, array_length) --String identifies the instance of SimpleNumDistribution to use
--(Shuffles a vector of indices, Next() increments through then reshuffles when end() is reached)
On branch cxxrandom-rel
Changes to be committed:
modified: plugins/CMakeLists.txt
new file: plugins/cxxrandom.cpp
new file: plugins/lua/cxxrandom.lua
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Squashed commit of the following:
commit 3a7ef70d45f3e0c2fe367141dd0349dddaaff60d
Merge: fd9f1982 7aa0608c
Author: Josh Cooper <cooper.s.josh@gmail.com>
Date: Fri Dec 22 22:17:27 2017 -0800
Merge remote-tracking branch 'origin/temp' into cxxrandom
commit 7aa0608cb85dcf82686193db7a6e9d1318f5f2a5
Author: Josh Cooper <cooper.s.josh@gmail.com>
Date: Thu Dec 21 21:43:35 2017 -0800
Revises cxxrandom plugin
New functions:
- seedRNG(ushort seed)
--lua exported
- GetDistribContainer()
--internal singleton
- RNG()
--internal singleton
Summary:
- Removed class CXXRNG
--Refactored functions that used CXXRNG
Changes to be committed:
modified: plugins/cxxrandom.cpp
commit b42979818a01c1121eace7b1ac14676f5ad5d8b2
Author: Josh Cooper <cooper.s.josh@gmail.com>
Date: Wed Dec 20 13:21:49 2017 -0800
Fixes plugin_init()
Misread the lines indicated by lethosor to be excluded, had broken the plugin in the process.
Changes to be committed:
modified: plugins/cxxrandom.cpp
commit 753a00a14d9e6519d299638e014abf30509940af
Author: Josh Cooper <cooper.s.josh@gmail.com>
Date: Wed Dec 20 12:36:17 2017 -0800
Cleans up cxxrandom.cpp
DFHack contributions specifies:
-spaces instead of tabs, so tabs were converted.
-C++ headers before dfhack stuff, so it was done
*Also added author name, creation date, and last updated date.
Changes to be committed:
modified: plugins/cxxrandom.cpp
commit 498ebe4b8fdccc01ac1f169269f3093c830a8a10
Author: Josh Cooper <cooper.s.josh@gmail.com>
Date: Tue Dec 19 22:51:58 2017 -0800
Updates cxxrandom, fixes instance leak
deleted header
moved definition to cpp file #lethosor
fixed singleton instance, no longer a pointer
commented out dfhack commands, now only init/shutdown and exported lua functions
modified: cxxrandom.cpp
deleted: cxxrandom.h
commit 821044bef2a0201d0d74192e445c7b29766b42a1
Author: Josh Cooper <cooper.s.josh@gmail.com>
Date: Sun Dec 17 04:01:11 2017 -0800
Fixes RollIndex and Renames RollNormal
Renamed the Normal Distribution RNG function to fit the standard.
Now named RollNormal(m,s)
Fixed some wonky white space in the lua macro export block.
Fixed a stupid mistake with the RollIndex output. (it was outputting 0's)
Updated usage details.
Changes to be committed:
modified: plugins/cxxrandom.cpp
commit 1536f43d137b6bc55d55759b43bdccf6ff429b33
Author: Josh Cooper <cooper.s.josh@gmail.com>
Date: Fri Dec 15 08:50:08 2017 -0800
Fixes/Improves cxxrandom
Modified return types
Corrected index distribution code
commit 8629c7e1509522cb0cc4b649914b90d033cb4763
Author: Josh Cooper <cooper.s.josh@gmail.com>
Date: Thu Dec 14 19:02:29 2017 -0800
Implements SimpleNumDistribution
Exported additional functions to lua.
Functions allow the generation of random 0-N index values.
Generation promises all unique values [0,N] will be returned once each when generation is run N times.
On branch cxxrandom
Changes to be committed:
modified: plugins/cxxrandom.cpp
modified: plugins/cxxrandom.h
commit f035f3d20415790542cf83e5e696261661d911f3
Author: Josh Cooper <cooper.s.josh@gmail.com>
Date: Wed Dec 13 23:55:39 2017 -0800
Implements cxxrandom
cxxrandom was implemented using a singleton.
This singleton provides an interface for generating uniform numbers, or numbers in a normal distribution, and also booleans(given the probability for the true outcome)
The singleton interface is wrapped in functions which are exposed for lua usage.
Integrated into plugins/CMakeLists.txt
On branch dev
Changes to be committed:
modified: CMakeLists.txt
new file: cxxrandom.cpp
new file: cxxrandom.h
new file: lua/cxxrandom.lua
lethosor
Myk Taylor
myk002
Alan
Josh Cooper
Warmist
KlonZK
Pauli
Daniel Brooks
Kelly Kinkade
Eric Wald