diff --git a/.github/workflows/build.yml b/.github/workflows/build.yml index 8c3819f11..b0164ff2e 100644 --- a/.github/workflows/build.yml +++ b/.github/workflows/build.yml @@ -4,7 +4,19 @@ on: [push, pull_request] jobs: build: - runs-on: ubuntu-18.04 + runs-on: ${{ matrix.os }} + name: build (Linux, GCC ${{ matrix.gcc }}) + strategy: + fail-fast: false + matrix: + os: + - ubuntu-18.04 + gcc: + - 4.8 + - 7 + include: + - os: ubuntu-20.04 + gcc: 10 steps: - name: Set up Python 3 uses: actions/setup-python@v2 @@ -14,6 +26,7 @@ jobs: run: | sudo apt-get update sudo apt-get install \ + libgtk2.0-0 \ libsdl-image1.2-dev \ libsdl-ttf2.0-dev \ libsdl1.2-dev \ @@ -23,6 +36,10 @@ jobs: ninja-build \ zlib1g-dev pip install sphinx + - name: Install GCC + if: ${{ matrix.gcc < 7 || matrix.gcc > 9 }} + run: | + sudo apt-get install gcc-${{ matrix.gcc }} g++-${{ matrix.gcc }} - name: Clone DFHack uses: actions/checkout@v1 with: @@ -32,9 +49,9 @@ jobs: id: env_setup run: | DF_VERSION="$(sh travis/get-df-version.sh)" - echo "::set-env name=DF_VERSION::${DF_VERSION}" echo "::set-output name=df_version::${DF_VERSION}" - echo "::set-env name=DF_FOLDER::${HOME}/DF/${DF_VERSION}/df_linux" + echo "DF_VERSION=${DF_VERSION}" >> $GITHUB_ENV + echo "DF_FOLDER=${HOME}/DF/${DF_VERSION}/df_linux" >> $GITHUB_ENV - name: Fetch DF cache uses: actions/cache@v2 with: @@ -43,15 +60,10 @@ jobs: - name: Download DF run: | sh travis/download-df.sh - - name: Build docs - run: | - sphinx-build -qW -j3 . docs/html - - name: Upload docs - uses: actions/upload-artifact@v1 - with: - name: docs - path: docs/html - name: Build DFHack + env: + CC: gcc-${{ matrix.gcc }} + CXX: g++-${{ matrix.gcc }} run: | cmake \ -S . \ @@ -77,12 +89,35 @@ jobs: name: test-artifacts path: artifacts - name: Clean up DF folder - # to prevent DFHack-generated files from ending up in the cache + # prevent DFHack-generated files from ending up in the cache # (download-df.sh also removes them, this is just to save cache space) if: success() || failure() run: | rm -rf "$DF_FOLDER" + docs: + runs-on: ubuntu-18.04 + steps: + - name: Set up Python 3 + uses: actions/setup-python@v2 + with: + python-version: 3 + - name: Install dependencies + run: | + pip install sphinx + - name: Clone DFHack + uses: actions/checkout@v1 + with: + submodules: true + - name: Build docs + run: | + sphinx-build -W --keep-going -j3 . docs/html + - name: Upload docs + uses: actions/upload-artifact@v1 + with: + name: docs + path: docs/html + lint: runs-on: ubuntu-18.04 steps: diff --git a/CMakeLists.txt b/CMakeLists.txt index ce3104bca..4f8b42521 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -185,7 +185,7 @@ endif() # set up versioning. set(DF_VERSION "0.47.04") -set(DFHACK_RELEASE "r2") +set(DFHACK_RELEASE "r3") set(DFHACK_PRERELEASE FALSE) set(DFHACK_VERSION "${DF_VERSION}-${DFHACK_RELEASE}") @@ -442,6 +442,7 @@ if(BUILD_DOCS) file(GLOB SPHINX_DEPS "${CMAKE_CURRENT_SOURCE_DIR}/docs/*.rst" + "${CMAKE_CURRENT_SOURCE_DIR}/docs/guides/*.rst" "${CMAKE_CURRENT_SOURCE_DIR}/docs/changelog.txt" "${CMAKE_CURRENT_SOURCE_DIR}/docs/gen_changelog.py" "${CMAKE_CURRENT_SOURCE_DIR}/docs/images/*.png" diff --git a/conf.py b/conf.py index d6c40b0a7..d5ecc3a45 100644 --- a/conf.py +++ b/conf.py @@ -195,18 +195,21 @@ needs_sphinx = '1.8' extensions = [ 'sphinx.ext.extlinks', 'dfhack.changelog', + 'dfhack.lexer', ] # This config value must be a dictionary of external sites, mapping unique # short alias names to a base URL and a prefix. # See http://sphinx-doc.org/ext/extlinks.html extlinks = { - 'wiki': ('http://dwarffortresswiki.org/%s', ''), + 'wiki': ('https://dwarffortresswiki.org/%s', ''), 'forums': ('http://www.bay12forums.com/smf/index.php?topic=%s', 'Bay12 forums thread '), - 'dffd': ('http://dffd.bay12games.com/file.php?id=%s', 'DFFD file '), - 'bug': ('http://www.bay12games.com/dwarves/mantisbt/view.php?id=%s', + 'dffd': ('https://dffd.bay12games.com/file.php?id=%s', 'DFFD file '), + 'bug': ('https://www.bay12games.com/dwarves/mantisbt/view.php?id=%s', 'Bug '), + 'source': ('https://github.com/DFHack/dfhack/tree/develop/%s', ''), + 'source:scripts': ('https://github.com/DFHack/scripts/tree/master/%s', ''), 'issue': ('https://github.com/DFHack/dfhack/issues/%s', 'Issue '), 'commit': ('https://github.com/DFHack/dfhack/commit/%s', 'Commit '), } @@ -280,6 +283,9 @@ default_role = 'ref' # The name of the Pygments (syntax highlighting) style to use. pygments_style = 'sphinx' +# The default language to highlight source code in. +highlight_language = 'dfhack' + # If true, `todo` and `todoList` produce output, else they produce nothing. todo_include_todos = False diff --git a/data/blueprints/README.md b/data/blueprints/README.md index 80023d313..fb4e2d9ef 100644 --- a/data/blueprints/README.md +++ b/data/blueprints/README.md @@ -1,756 +1,4 @@ +This folder contains blueprints used by the `quickfort` script. For more information, see: -[//]: # (The online version of this manual, which may be easier to read, is) -[//]: # (at https://github.com/DFHack/dfhack/tree/develop/data/blueprints) - -[//]: # (Note to editors: don't word wrap -- it breaks the formatting on GitHub) - -DFHack Quickfort User Manual -============================ - -DFHack Quickfort is a DFHack script that helps you build fortresses from "blueprint" .csv and .xlsx files. Many applications exist to edit these files, such as MS Excel and [Google Sheets](https://sheets.new). You can also build your plan "for real" in Dwarf Fortress, and then export your map using DFHack's [blueprint](https://docs.dfhack.org/en/stable/docs/Plugins.html#blueprint) plugin. Most layout and building-oriented DF commands are supported through the use of multiple files or spreadsheets, each describing a different phase of DF construction: designation, building, placing stockpiles/zones, and setting configuration. - -The original idea and 1.0 codebase came from [Valdemar's](https://dwarffortresswiki.org/index.php/User:Valdemar) auto-designation macro. Joel Thornton (joelpt) reimplemented the core logic in Python and extended its functionality with [Quickfort 2.0](https://github.com/joelpt/quickfort). This DFHack-native implementation, called "DFHack Quickfort" or just "quickfort", builds upon Quickfort 2.0's formats and features. DFHack Quickfort is written in Lua and interacts with Dwarf Fortress memory structures directly, allowing for instantaneous blueprint application, error checking and recovery, and many other advanced features. - -This document focuses on DFHack Quickfort's capabilities and teaches players how to understand and build blueprint files. Some of the text was originally written by Joel Thornton, reused here with his permission. - -For those just looking to apply blueprints, check out the [quickfort command syntax](https://docs.dfhack.org/en/stable/docs/_auto/base.html#quickfort) in the DFHack Scripts documentation. There are also many ready-to-use blueprints available in the `blueprints/library` subfolder in your DFHack installation. Browse them on your computer or [online](https://github.com/DFHack/dfhack/tree/develop/data/blueprints/library), or run `quickfort list -l` at the `DFHack#` prompt to list them, and then `quickfort run` to apply them to your fort! - -See the [Links section](#links) for more information and online resources. - - -Table of Contents ------------------ - -* [Features](#features) -* [Editing Blueprints](#editing-blueprints) - * [Area expansion syntax](#area-expansion-syntax) - * [Automatic area expansion](#automatic-area-expansion) - * [Multilevel blueprints](#multilevel-blueprints) - * [Marker mode](#marker-mode) - * [Dig priorities](#dig-priorities) - * [Stockpiles and zones](#stockpiles-and-zones) - * [Minecart tracks](#minecart-tracks) - * [Modeline markers](modeline-markers) - * [Packaging a set of blueprints](#packaging-a-set-of-blueprints) - * [Meta blueprints](#meta-blueprints) -* [Buildingplan integration](#buildingplan-integration) -* [Generating manager orders](#generating-manager-orders) -* [Tips and tricks](#tips-and-tricks) -* [Caveats and limitations](#caveats-and-limitations) -* [Links](#links) - - -Features --------- - -* General - * Manages blueprints to handle all phases of DF construction - * Supports .csv and multi-worksheet .xlsx blueprint files - * Near-instant application, even for very large and complex blueprints - * Blueprints can span multiple z-levels - * Supports multiple blueprints per .csv file/spreadsheet sheet - * "meta" blueprints that automate the application of sequences of blueprints - * Undo functionality for dig, build, place, and zone blueprints - * Automatic cropping of blueprints so you don't get errors if the blueprint extends off the map - * Can generate manager orders for everything required by a build blueprint - * Library of ready-to-use blueprints included - * Verbose output mode for debugging -* Dig mode - * Supports all types of designations, including dumping/forbidding items and setting traffic settings - * Supports setting dig priorities - * Supports applying dig blueprints in marker mode - * Handles carving arbitrarily complex minecart tracks, including tracks that cross other tracks -* Build mode - * DFHack buildingplan integration - * Designate complete constructions at once, without having to wait for each tile to become supported before you can build it - * Automatic expansion of building footprints to their minimum dimensions, so only the center tile of a multi-tile building needs to be recorded in the blueprint - * Tile occupancy and validity checking so, for example, buildings that cannot be placed on a certain tile will simply be skipped instead of the blueprint failing to apply. Blueprints that are only partially applied for any reason (for example, you need to dig out some more tiles) can be safely reapplied to build the remaining buildings. - * Relaxed rules for farm plot and road placement: you can still place the building even if an invalid tile (e.g. stone tiles for farm plots) splits the designated area into two parts - * Intelligent boundary detection for adjacent buildings of the same type (e.g. a 6x6 block of `wj` cells will be correctly split into 4 jeweler's workshops) -* Place and zone modes - * Define stockpiles and zones in any continguous shape, not just rectangular blocks - * Configurable maximums for bins, barrels and wheelbarrows assigned to created stockpiles - * Automatic splitting of stockpiles and zones that exceed maximum dimension limits -* Query mode - * Send arbitrary keystroke sequences to the UI -- *anything* you can do through the UI is supported - * Supports aliases to automate frequent keystroke combos - * Includes a library of pre-made and tested aliases to automate most common tasks, such as configuring stockpiles for important item types or creating named hauling routes for quantum stockpiles. - * Supports including aliases in other aliases, and repeating key sequences a specified number of times - * Skips sending key sequences when the cursor is over a tile that does not have a stockpile or building, so missing buildings won't desynchronize your blueprint - * Instant halting of query blueprint application when keystroke errors are detected, such as when a key sequence leaves us stuck in a submenu, to make blueprint misconfigurations easier to debug - - -Editing Blueprints ------------------- - -We recommend using a spreadsheet editor such as Excel, [Google Sheets](https://sheets.new), or [LibreOffice](https://www.libreoffice.org) to edit blueprint files, but any text editor will do. - -The format of Quickfort-compatible blueprint files is straightforward. The first line (or upper-left cell) of the spreadsheet should look like this: - - #dig This is a decription. - -The keyword "dig" tells Quickfort we are going to be using the Designations menu in DF. The following "mode" keywords are understood: - - dig Designations menu (d) - build Build menu (b) - place Place stockpiles menu (p) - zone Activity zones menu (i) - query Set building tasks/prefs menu (q) - -There are also "meta" blueprints, but we'll talk about those [later](#meta-blueprints). - -Optionally following this keyword and a space, you may enter a comment. This comment will appear in the output of `quickfort list` when run from the `DFHack#` prompt. You can use this space for explanations, attribution, etc. - -Below this line begin entering the keys you want sent in each cell. For example, we could dig out a 4x4 room like so (spaces are used as column separators here for clarity, but a real .csv file would have commas): - - #dig - d d d d # - d d d d # - d d d d # - d d d d # - # # # # # - -Note the # symbols at the right end of each row and below the last row. These are completely optional, but can be helpful to make the row and column positions clear. - -Once the dwarves have that dug out, let's build a walled-in bedroom within our dug-out area: - - #build - Cw Cw Cw Cw # - Cw b h Cw # - Cw Cw # - Cw Cw Cw # - # # # # # - -Note my generosity - in addition to the bed (b) I've built a chest (h) here for the dwarf as well. You must use the full series of keys needed to build something in each cell, e.g. 'Cw' enters DF's constructions submenu (C) and selects walls (w). - -I'd also like to place a booze stockpile in the 2 unoccupied tiles in the room. - - #place Place a food stockpile - ` ` ` ` # - ` ` ` ` # - ` f(2x1)# - ` ` ` ` # - # # # # # - -This illustration may be a little hard to understand. The f(2x1) is in column 2, row 3. All the other cells are empty. QF considers both "`" (backtick -- the character under the tilde) and "~" (tilde) characters within cells to be empty cells; this can help with multilayer or fortress-wide blueprint layouts as 'chalk lines'. - -With f(2x1), we've asked QF to place a food stockpile 2 units wide by 1 high unit. Note that the f(2x1) syntax isn't actually necessary here; we could have just used: - - #place Place a food stockpile - ` ` ` ` # - ` ` ` ` # - ` f f ` # - ` ` ` ` # - # # # # # - -QF is smart enough to recognize this as a 2x1 food stockpile, and creates it as such rather than as two 1x1 food stockpiles. Quickfort recognizes any connected region of identical designations as a single stockpile. The tiles can be connected orthogonally or diagonally, just as long as they are touching somehow. - -Lastly, let's turn the bed into a bedroom and set the food stockpile to hold only booze. - - #query - ` ` ` ` # - ` r& ` # - ` booze # - ` ` ` ` # - # # # # # - -In column 2, row 2 we have "r&". This sends the "r" key to DF when the cursor is over the bed, causing us to 'make room' and "&", which is a special symbol that expands to "{Enter}", to indicate that we're done. - -In column 2, row 3 we have "booze". This is one of many alias keywords defined in the included [baseline aliases file](https://github.com/DFHack/dfhack/tree/develop/data/quickfort/aliases-common.txt). This particular alias sets a food stockpile to carry booze only. It sends the keys needed to navigate DF's stockpile settings menu, and then sends an Escape character ("^" or "{ESC}") to exit back to the map. It is important to exit out of any menus that you enter while in query mode so that the cursor can move to the next tile when it is done configuring the current tile. - -Check out the included [blueprint library](https://github.com/DFHack/dfhack/tree/develop/data/blueprints/library) to see many more examples. Read the baseline aliases file for helpful pre-packaged aliases, or create your own in [dfhack-config/quickfort/aliases.txt](https://github.com/DFHack/dfhack/tree/develop/dfhack-config/quickfort/aliases.txt) in your DFHack installation. - - -Area expansion syntax ---------------------- - -In Quickfort, the following blueprints are equivalent: - - #dig a 3x3 area - d d d # - d d d # - d d d # - # # # # - - #dig the same area with d(3x3) specified in row 1, col 1 - d(3x3)# - ` ` ` # - ` ` ` # - # # # # - -The second example uses Quickfort's "area expansion syntax", which takes the form: - - keys(WxH) - -In Quickfort the above two examples of specifying a contiguous 3x3 area produce identical output: a single 3x3 designation will be performed, rather than nine 1x1 designations as the first example might suggest. - -Area expansion syntax can only specify rectangular areas. If you want to create extent-based structures (e.g. farm plots or stockpiles) in different shapes, use the first format above. For example: - - #place L shaped food stockpile - f f ` ` # - f f ` ` # - f f f f # - f f f f # - # # # # # - -Area expansion syntax also sets boundaries, which can be useful if you want adjacent, but separate, stockpiles of the same type: - - #place Two touching but separate food stockpiles - f(4x2) # - ~ ~ ~ ~ # - f(4x2) # - ~ ~ ~ ~ # - # # # # # - -As mentioned previously, "~" characters are ignored as comment characters and can be used for visualizing the blueprint layout. The blueprint can be equivalently written as: - - #place Two touching but separate food stockpiles - f(4x2) # - ~ ~ ~ ~ # - f f f f # - f f f f # - # # # # # - -since the area expansion syntax of the upper stockpile prevents it from combining with the lower, freeform syntax stockpile. - -Area expansion syntax can also be used for buildings which have an adjustable size, like bridges. The following blueprints are equivalent: - - #build a 4x2 bridge from row 1, col 1 - ga(4x2) ` # - ` ` ` ` # - # # # # # - - #build a 4x2 bridge from row 1, col 1 - ga ga ga ga # - ga ga ga ga # - # # # # # - - -Automatic area expansion ------------------------- - -Buildings larger than 1x1, like workshops, can be represented in any of three ways. You can designate just their center tile with empty cells around it to leave room for the footprint, like this: - - #build a mason workshop in row 2, col 2 that will occupy the 3x3 area - ` ` ` # - ` wm ` # - ` ` ` # - # # # # - -Or you can fill out the entire footprint like this: - - #build a mason workshop - wm wm wm # - wm wm wm # - wm wm wm # - # # # # - -This format may be verbose for regular workshops, but it can be very helpful for laying out structures like screw pump towers and waterwheels, whose "center point" can be non-obvious. - -Finally, you can use area expansion syntax to represent the workshop: - - #build a mason workshop - wm(3x3) # - ` ` ` # - ` ` ` # - # # # # - -This style can be convenient for laying out multiple buildings of the same type. If you are building a large-scale block factory, for example, this will create 20 mason workshops all in a row: - - #build line of 20 mason workshops - wm(60x3) # - -Quickfort will intelligently break large areas of the same designation into appropriately-sized chunks. - - -Multilevel blueprints ---------------------- - -Multilevel blueprints are accommodated by separating Z-levels of the blueprint with `#>` (go down one z-level) or `#<` (go up one z-level) at the end of each floor. - - #dig Stairs leading down to a small room below - j ` ` # - ` ` ` # - ` ` ` # - #> # # # - u d d # - d d d # - d d d # - # # # # - -The marker must appear in the first column of the row to be recognized, just like a modeline. - - -Dig priorities --------------- - -DF designation priorities are supported for `#dig` blueprints. The full syntax is `[letter][number][expansion]`, where if the `letter` is not specified, `d` is assumed, and if `number` is not specified, `4` is assumed (the default priority). So each of these blueprints is equivalent: - - #dig dig the interior of the room at high priority - d d d d d # - d d1 d1 d1 d # - d d1 d1 d1 d # - d d1 d1 d1 d # - d d d d d # - # # # # # # - - #dig dig the interior of the room at high priority - d d d d d # - d d1(3x3) d # - d ` ` ` d # - d ` ` ` d # - d d d d d # - # # # # # # - - #dig dig the interior of the room at high priority - 4 4 4 4 4 # - 4 1 1 1 4 # - 4 1 1 1 4 # - 4 1 1 1 4 # - 4 4 4 4 4 # - # # # # # # - - -Marker mode ------------ - -Marker mode is useful for when you want to plan out your digging, but you don't want to dig everything just yet. In `#dig` mode, you can add a `m` before any other designation letter to indicate that the tile should be designated in marker mode. For example, to dig out the perimeter of a room, but leave the center of the room marked for digging later: - - #dig - d d d d d # - d md md md d # - d md md md d # - d md md md d # - d d d d d # - # # # # # # - -Then you can use "Toggle Standard/Marking" (`d-M`) to convert the center tiles to regular designations at your leisure. - -To apply an entire dig blueprint in marker mode, regardless of what the blueprint itself says, you can set the global quickfort setting `force_marker_mode` to `true` before you apply the blueprint. - -Note that the in-game UI setting "Standard/Marker Only" (`d-m`) does not have any effect on quickfort. - - -Stockpiles and zones --------------------- - -It is very common to have stockpiles that accept multiple categories of items or zones that permit more than one activity. Although it is perfectly valid to declare a single-purpose stockpile or zone and then modify it with a `#query` blueprint, quickfort also supports directly declaring all the types on the `#place` and `#zone` blueprints. For example, to declare a 10x10 area that is a pasture, a fruit picking area, and a meeting area all at once, you could write: - - #zone main pasture and picnic area - nmg(10x10) - -And similarly, to declare a stockpile that accepts both corpses and refuse, you could write: - - #place refuse heap - yr(20x10) - -The order of the individual letters doesn't matter. - -To toggle the `active` flag for zones, add an `a` character to the string. For example, to create a *disabled* pit zone (that you later intend to turn into a pond and carefully fill to 3-depth water): - - #zone disabled future pond zone - pa(1x3) - -Note that while this notation covers most use cases, tweaking low-level zone parameters, like hospital supply levels or converting between pits and ponds, must still be done manually or with a `#query` blueprint. - - -Minecart tracks ---------------- - -There are two ways to produce minecart tracks, and they are handled very differently by the game. You can carve them into hard natural floors or you can construct them out of building materials. Constructed tracks are conceptually simpler, so we'll start with them. - -### Constructed tracks ### - -Quickfort supports the designation of track stops and rollers through the normal mechanisms: a `#build` blueprint with `CS` and some number of `d` and `a` characters (for selecting dump direction and friction) in a cell designates a track stop and a `#build` blueprint with `Mr` and some number of `s` and `q` characters (for direction and speed) designates a roller. This can get confusing very quickly and is very difficult to read in a blueprint. Constructed track segments don't even have keys associated with them at all! - -To solve this problem, Quickfort provides the following keywords for use in build blueprints: - - -- Track segments -- - trackN - trackS - trackE - trackW - trackNS - trackNE - trackNW - trackSE - trackSW - trackEW - trackNSE - trackNSW - trackNEW - trackSEW - trackNSEW - - -- Track/ramp segments -- - trackrampN - trackrampS - trackrampE - trackrampW - trackrampNS - trackrampNE - trackrampNW - trackrampSE - trackrampSW - trackrampEW - trackrampNSE - trackrampNSW - trackrampNEW - trackrampSEW - trackrampNSEW - - -- Horizontal and vertical roller segments -- - rollerH - rollerV - rollerNS - rollerSN - rollerEW - rollerWE - - Note: append up to four 'q' characters to roller keywords to set roller - speed. E.g. a roller that propels from East to West at the slowest speed can - be specified with 'rollerEWqqqq'. - - -- Track stops that (optionally) dump to the N/S/E/W -- - trackstop - trackstopN - trackstopS - trackstopE - trackstopW - - Note: append up to four 'a' characters to trackstop keywords to set friction - amount. E.g. a stop that applies the smallest amount of friction can be - specified with 'trackstopaaaa'. - -As an example, you can create an E-W track with stops at each end that dump to their outside directions with the following blueprint: - - #build Example track - trackstopW trackEW trackEW trackEW trackstopE - -Note that the **only** way to build track and track/ramp segments is with the keywords. The UI method of using "+" and "-" keys to select the track type from a list does not work since DFHack Quickfort doesn't actually send keys to the UI to build buildings. The text in your spreadsheet cells is mapped directly into DFHack API calls. Only `#query` blueprints still send actual keycodes to the UI. - -### Carved tracks ### - -In the game, you carve a minecart track by specifying a beginning and ending tile and the game "adds" the designation to the tiles. You cannot designate single tiles. For example to carve two track segments that cross each other, you might use the cursor to designate a line of three vertical tiles like this: - - ` start here ` # - ` ` ` # - ` end here ` # - # # # # - -Then to carve the cross, you'd do a horizonal segment: - - ` ` ` # - start here ` end here # - ` ` ` # - # # # # - -This will result in a carved track that would be equivalent to a constructed track of the form: - - #build - ` trackS ` # - trackE trackNSEW trackW # - ` trackN ` # - # # # # - -To carve this same track with a `#dig` blueprint, you'd use area expansion syntax with a height or width of 1 to indicate the segments to designate: - - #dig - ` T(1x3) ` # - T(3x1) ` ` # - ` ` ` # - # # # # - -"But wait!", I can hear you say, "How do you designate a track corner that opens to the South and East? You can't put both T(1xH) and T(Wx1) in the same cell!" This is true, but you can specify both width and height, and for tracks, QF interprets it as an upper-left corner extending to the right W tiles and down H tiles. For example, to carve a track in a closed ring, you'd write: - - #dig - T(3x3) ` T(1x3) # - ` ` ` # - T(3x1) ` ` # - # # # # - -Which would result in a carved track simliar to a constructed track of the form: - - #build - trackSE trackEW trackSW # - trackNS ` trackNS # - trackNE trackEW trackNW # - # # # # - - -Modeline markers ----------------- - -The modeline has some additional optional components that we haven't talked about yet. You can: - -* give a blueprint a label by adding a `label()` marker -* set a cursor offset and/or start hint by adding a `start()` marker -* hide a blueprint from being listed with a `hidden()` marker -* register a message to be displayed after the blueprint is successfully applied - -The full modeline syntax, when everything is specified, is: - - #mode label(mylabel) start(X;Y;STARTCOMMENT) hidden() message(mymessage) comment - -Note that all elements are optional except for the initial `#mode`. Here are a few examples of modelines with optional elements before we discuss them in more detail: - - #dig start(3; 3; Center tile of a 5-tile square) Regular blueprint comment - #build label(noblebedroom) start(10;15) - #query label(configstockpiles) No explicit start() means cursor is at upper left corner - #meta label(digwholefort) start(center of stairs on surface) - #dig label(digdining) hidden() managed by the digwholefort meta blueprint - #zone label(pastures) message(remember to assign animals to the new pastures) - -### Blueprint labels ### - -Labels are displayed in the `quickfort list` output and are used for addressing specific blueprints when there are multiple blueprints in a single file or spreadsheet sheet (see [Packaging a set of blueprints](#packaging-a-set-of-blueprints) below). If a blueprint has no label, the label becomes the ordinal of the blueprint's position in the file or sheet. For example, the label of the first blueprint will be "1" if it is not otherwise set, the label of the second blueprint will be "2" if it is not otherwise set, etc. Labels that are explicitly defined must start with a letter to ensure the auto-generated labels don't conflict with user-defined labels. - -### Start positions ### - -Start positions specify a cursor offset for a particular blueprint, simplifying the task of blueprint alignment. This is very helpful for blueprints that are based on a central staircase, but it helps whenever a blueprint has an obvious "center". For example: - - #build start(2;2;center of workshop) label(masonw) a mason workshop - wm wm wm # - wm wm wm # - wm wm wm # - # # # # - -will build the workshop *centered* on the cursor, not down and to the right of the cursor. - -The two numbers specify the column and row (or X and Y offset) where the cursor is expected to be when you apply the blueprint. Position 1;1 is the top left cell. The optional comment will show up in the `quickfort list` output and should contain information about where to position the cursor. If the start position is 1;1, you can omit the numbers and just add a comment describing where to put the cursor. This is also useful for meta blueprints that don't actually care where the cursor is, but that refer to other blueprints that have fully-specified `start()` markers. For example, a meta blueprint that refers to the `masonw` blueprint above could look like this: - - #meta start(center of workshop) a mason workshop - /masonw - -### Hiding blueprints ### - -A blueprint with a `hidden()` marker won't appear in `quickfort list` output unless the `--hidden` flag is specified. The primary reason for hiding a blueprint (rather than, say, deleting it or moving it out of the `blueprints/` folder) is if a blueprint is intended to be run as part of a larger sequence managed by a [meta blueprint](#meta-blueprints). - -### Messages ### - -A blueprint with a `message()` marker will display a message after the blueprint is applied with `quickfort run`. This is useful for reminding players to take manual steps that cannot be automated, like assigning animals to a pasture or assigning minecarts to a route, or listing the next step in a series of blueprints. For long or multi-part messages, you can embed newlines: - - "#meta label(surface1) message(This would be a good time to start digging the industry level. - Once the area is clear, continue with /surface2.) clear the embark site and set up pastures" - -Packaging a set of blueprints ------------------------------ - -A complete specification for a section of your fortress may contain 5 or more separate blueprints, one for each "phase" of construction (dig, build, place stockpiles, designate zones, query building adjustments). - -To manage all the separate blueprints, it is often convenient to keep related blueprints in a single file. For .xlsx spreadsheets, you can keep each blueprint in a separate sheet. Online spreadsheet applications like [Google Sheets](https://sheets.new) make it easy to work with multiple related blueprints, and, as a bonus, they retain any formatting you've set, like column sizes and coloring. - -For both .csv files and .xlsx spreadsheets you can also add as many blueprints as you want in a single file or sheet. Just add a modeline in the first column to indicate the start of a new blueprint. Instead of multiple .csv files, you can concatenate them into one single file. - -For example, you can store multiple blueprints together like this: - - #dig label(bed1) - d d d d # - d d d d # - d d d d # - d d d d # - # # # # # - #build label(bed2) - b f h # - # - # - n # - # # # # # - #place label(bed3) - # - f(2x2) # - # - # - # # # # # - #query label(bed4) - # - booze # - # - # - # # # # # - #query label(bed5) - r{+ 3}& # - # - # - # - # # # # # - - -Of course, you could still choose to keep your blueprints in single-sheet .csv files and just give related blueprints similar names: - - bedroom.1.dig.csv - bedroom.2.build.csv - bedroom.3.place.csv - bedroom.4.query.csv - bedroom.5.query2.csv - -But the naming and organization is completely up to you. - - -Meta blueprints ---------------- - -Meta blueprints are blueprints that script a series of other blueprints. Many blueprint packages follow this pattern: - -- Apply dig blueprint to designate dig areas -- Wait for miners to dig -- **Apply build buildprint** to designate buildings -- **Apply place buildprint** to designate stockpiles -- **Apply query blueprint** to configure stockpiles -- Wait for buildings to get built -- Apply a different query blueprint to configure rooms - -Those three "apply"s in the middle might as well get done in one command instead of three. A meta blueprint can encode that sequence. A meta blueprint refers to other blueprints by their label (see the [Modeline markers](modeline-markers) section above) in the same format used by the `DFHack#` quickfort command: "/